MATERIAL SAFETY DATA SHEET

PRODUCT NAME
ADsorb-it
MANUFACTURER
Eco-Tec, Inc.
  PO Box 690, Vaughn WA 98394-0690
Emergency Telephone Number 888-668-8982
Information Telephone Number 888-668-8982
HAZARDOUS INGREDIENTS / IDENTITY INFORMATION
Hazardous Components
None
Identity Information
Synthetic / polymer fiber blend
PHYSICAL / CHEMICAL CHARACTERISTICS
Boiling Point
N/A
Specific Gravity (H2O=1)
N/A
Vapor Pressure (mm Hg)
N/A
pH (concentrate)
N/A
Melting Point
480 - 570 degrees F
Vapor Density (Air=1)
N/A
Evaporation Rate (Butyl Acetate=1)
N/A
Solubility in Water
Not Soluble
Appearance / Odor
Color: gray to blue-gray, odorless
FIRE / EXPLOSION HAZARD DATA
Flash Point
(NEPA Fire Analysis, polymer fiber pg. 4-49, 18th Edition, 1997)
840 - 1040 degrees F
Flammable Limits
1290 - 1330
LEL
680 degrees F
UEL
750 degrees F
Extinguishing Media
Water spray, ABC dry chemical
Special Fire Fighting Procedures
Use self contained breathing apparatus when fighting fires in enclosed areas when exposure to smoke and gasses could occur (including cleanup and salvage operations).
Unusual Fire and Explosion Hazards
Protein type air foams would be ineffective on larger fires due to lack of cooling capacity which could result in re-ignition.
Page 1 of 2
REACTIVITY DATA
Stability
Stable
Conditions to Avoid
None
Incompatibility
None
Hazardous Decomposition / By-Products
None
Hazardous Polymerization
Will Not Occur
Conditions to Avoid
None
HEALTH HAZARD DATA
Routes of Entry
Inhalation
Minor dust
Skin
None
Ingestion
N/A
Health Hazards
A fine, non-irritating dust may occur when handling loose fiber. Persons with breathing abnormalities may wish to wear a common filter mask. Dust is minor and does not occur with the fabric product.
Carcinogenicity
N/A
NTP
N/A
IARC Monographs
N/A
OSHA Regulated
No
Signs / Symptoms of Exposure
None
Medical Conditions Aggravated by Exposure
See "Health Hazards" above
Emergency First Aid Procedures
N/A
PRECAUTIONS FOR SAFE HANDLING AND USE
If Product is Released or Spilled
Use common industrial practices to clean up.
Waste Disposal
If unused, no special precautions are necessary. If used, dispose of in accordance with federal, state, and local regulations.
In certain types of cleanup applications the nature of the material recovered will classify the resulting spent material as a hazardous component. In such instances, the material should be disposed of via an approved hazardous waste disposal service and the appropriate manifesting obtained.
Precautions to be Taken in Handling and Storing
Avoid generating dust when handling loose fiber.
Other Precautions
None
CONTROL MEASURES
Respiratory Protection
Common dust mask is a good industrial practice but is not necessary.
Ventilation
No special ventilation is necessary.
Protective Gloves
May be used but not necessary.
Eye Protection
Safety glasses with side shields as a good industrial practice but is not necessary.
Other Protective Clothing or Equipment
None Required
Work / Hygienic Practices
Wash hands after handling as a good hygienic practice.
PREPARED BY
Eco-Tec, Inc. / Ecology Technology
Per
Mary M. Peacock, Principal
Updated June 21, 2010
Page 2 of 2