ADsorb-it® Filtration Products
Remove Oil, Oil Sheen, Oil-Borne Contaminants and Suspended Solids from Water. Reusable Products. Made From Waste. Used to Clean the Environment. Ultimately a Fuel Source. “It doesn’t get any greener than that!”
ADsorb-it® Wipes 15″ squares 50-Pack
ADsorb-it® Fabric Wipes 15″ x 15″ squares. Reusable. Made from 100% waste fibers. Adsorbs between 15 – 20 times its weight in oil. Removes oil and sheen from water. Recycle physically recovered oil, launder to reuse. Disposable through waste-to-energy incineration.
The ADsorb-it® Mini-SurferTM, 24″ wide x 15″ high, is designed for use in sumps and bilges. They have a grommet at each end and can be interconnected. The 5″ diameter flotation boom can be removed to recover oils, and to launder and reuse indefinitely. They are disposable as fuel through waste-to-enery incineration.
Item #BC5-10/B, #BC5-10
The ADsorb-it® Boom Cover, made with ADsorb-it® FIltration Fabric, is designed for use with flotation booms 5 inches in diameter and 10 feet long. Covers can be removed, washed, and re-used repeatedly.
ADsorb-it® Filtration Fabric
Item #AF11-2, #AF11-5
Adsorb-it® fabric is made from 100% recycled select fibers from the textile industry; designed with the unique ability to allow the virtually unrestricted flow of salt or fresh water through the fabric at rates of approximately 100 gallons per minute per square foot while retaining oils, oil sheen, and oil-borne contaminants in the fabric matrix. Available in 250′ rolls 2′ wide and 5′ wide.
Shore GuardTM “Dumbo Surfer”TM
The “Dumbo Surfer” is designed for use in turbulent water and light surf to protect shorelines by capturing and retaining released oils, oil sheen and oil-borne contaminants. They can be interconnected and towed through a release to remove and recover the oil and oil sheen.
Vault Maintenance System
Item #VMS467, #VMS467-2F, #VMS467-2/HWB5
A staged filtration system in the form of an easy-to-use filter sock that will allow you to evacuate underground utility vaults directly into the environment. The system filters TSS and Oil & Grease to below regulatory guidelines. Also used very effectively when draining sprinkler systems. Filters out rust color from water so the water will not stain a driveway or sidewalk when draining systems
Filter Socks, all sizes
Item #SFS8-10, #SFS8-5, #SFS5-57, #SFS3-30
A heavy duty double-layer sock from ADsorb-it® Filtration Fabric for filtering silt, oil and oil sheen, or contaminants when flushing pipes, draining excavations, or underground vaults. Four standard sizes in stock. They can be made in any size to fit your individual needs.
Control oil and oil sheen in ditches and piping. Ideal size for zipper drains. ADsorb-it®Filtration Fabric encloses a 3” dia. by 5’ long flotation boom with a double layer of 9” long tendrils down each side with a webbing loop at each end and a stainless steel clip for hooking multiple units together. Webbing runs the full length of the Centipede for added strength.
Control oil and sheen in sumps and catch basins. A double layer of ADsorb-it®Filtration Fabric on a 3” dia. by 5’ long flotation boom with tendrils reaching 19” deep. The velcro and grommets at each end allow you to form the Hula Bug into a circle, or hook multiple units together for other applications.
ADsorb-it® Filtration Fabric floating curtain boom 21″ deep by 10′ long. For use on any body of water to remove oil and oil sheen from the surface and subsurface. Hook multiple units together to span any distance.
Boom & Dock CurtainTM
A 15″ deep by 10′ long double layer of ADsorb-it® Filtration Fabric designed to be attached to floating docks, barges, boat lifts, rafts, fence boom, and a variety of other floating media for the on-going removal of oils, oil sheen and oil-borne contaminants that have been released to the water.
Contour Ditch BoomTM
A single-layer ADsorb-it® Filtration Fabric curtain boom 24″ deep by 5′ long, for quick deployment in small waterways and ditches. It has a 3″ flotation boom across the top, with ballast chain in the bottom to allow it to conform to the shape of the bottom of the ditch or waterway. Eleven feet of 1/4″ poly rope runs under the boom at top with 3′ free on each side for tie-off.
Item #MOS12-30, #HOS-24, #HSH-60F
Mop up an oil or fuel spill on boat decks, in the shop, garage, or warehouse. Use the Oil SweepTM any place that would normally require hands-and-knees placement and removal of sorbent pads. The complete unit is comprised of three parts: the Oil SweepTM Cover, the Standard Frame, and the Fiberglass Handle.
We take pride in the quality of our ADsorb-it® Products.
We use only the finest materials in their construction. Our thread is a heavy duty polyester that is impervious to prolonged exposure to the elements and contaminants. Our designs are well thought-out, and based on over 30 years experience in the environmental industry. We will stand behind all of our products because our workmanship is top quality. We welcome input from our customers, and will work with you to create products for your specific needs.
Call us today to discuss the suitability of ADsorb-it® for your Oil Spill application.
Toll Free: US 1 (888) 668-8982
International: 001 (253) 884-6804